Melt Blown Cartridges
10″ X 2-1/2″ Melt-Blown Filters
-
10″ x 2-1/2″ Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron)
From: $4.00 -
10″ x 2-1/2″ Grooved Polypropylene Melt-Blown Filter (1, 5, or 20 Micron)
$6.00 -
Spun Polypropylene 9-3/4″ x 2-3/8″ Sediment Melt-Blown Filter by Pentek (1, 5, or 25 Micron)
From: $7.00 -
Everpure EC110 Prefilter Sediment Melt-Blown Filter
$6.76 - $7.51 -
10″ x 2-1/2″ 4-Layer Grooved Sediment Melt-Blown Filter (5 or 20 Micron)
$6.25 -
5 Micron Sediment Melt-Blown Filters, 4-Pack
$16.00
20″ X 2-1/2″ Melt-Blown Filters
-
20″ x 2-1/2″ Sediment Melt-Blown Filter (1, 5, 10, 20, or 50 Micron)
$8.00 -
20″ x 2-1/2″ Grooved Polypropylene Melt-Blown Filter, 5 Micron
$10.50 - $12.00 -
Spun Polypropylene 20″ x 2-3/8″ Sediment Filter (1, 5, or 25 Micron) by Pentek
$14.00 -
10 Micron Everpure EC210 Prefilter Cartridge
$11.53 - $13.03 -
20″ x 2-1/2″ 4-Layer Sediment Melt-Blown Filter, 5 Micron
$8.25
10″ x 4-1/2″ Full-Flow (BB) Melt-Blown Filters
-
10″ x 4-1/2″ Sediment Melt-Blown Filter (1, 5, 20, or 50 Micron)
$14.00 -
10″ x 4-1/2″ Grooved Polypropylene Melt-Blown Filter (5 or 20 Micron)
$18.00 -
Pentek Dual Gradient 10″ x 4-1/2″ (25/1, 50/5 or 75/25 Micron) Melt Blown Sediment Filter
From: $24.00
20″ x 4-1/2″ Full-Flow (BB) Melt-Blown Filters
-
20″ x 4-1/2″ Full Flow (1, 5, 20 or 50 Micron) Melt Blown Sediment Cartridge
$28.00 -
Pentek Dual Gradient 20″ x 4-1/2″ (25/1, 50/5 or 75/25 Micron) Melt Blown Sediment Filter
From: $42.50 -
20″ x 4-1/2″, 1 or 20 Micron, 4-Layer Melt Blown Sediment Cartridge
$25.00
30″ x 2-1/2″ Commercial Melt-Blown Filters
40″ x 2-1/2″ Commercial Melt-Blown Filters
Grooved Melt-Blown Filters
-
10″ x 2-1/2″ Grooved Polypropylene Melt-Blown Filter (1, 5, or 20 Micron)
$6.00 -
10″ x 4-1/2″ Grooved Polypropylene Melt-Blown Filter (5 or 20 Micron)
$18.00 -
20″ x 2-1/2″ Grooved Polypropylene Melt-Blown Filter, 5 Micron
$10.50 - $12.00 -
10″ x 2-1/2″ 4-Layer Grooved Sediment Melt-Blown Filter (5 or 20 Micron)
$6.25
Melt Blown Cartridges
Melt blown polypropylene cartridges are designed for the removal of dirt, rust and sediment from water. 5 and 20 micron are the most popular sizes for drinking water applications. Consider using a 20 micron cartridge first and then stepping down to a 5 micron cartridge.
Graded Density | Outer Layer | Middle Layer | Inner Layer |
---|---|---|---|
0.5 Micron Filter Layers | 5 Micron | 3 Micron | 0.5 Micron |
1 Micron Filter Layers | 20 Micron | 5 Micron | 1 Micron |
5 Micron Filter Layers | 30 Micron | 10 Micron | 5 Micron |
10 Micron Filter Layers | 30 Micron | 20 Micron | 10 Micron |
20 Micron Filter Layers | 50 Micron | 30 Micron | 20 Micron |
50 Micron Filter Layers | 100 Micron | 100 Micron | 50 Micron |
The LF-PP series melt blown cartridges come in all standard 10″, 20″, and big blue sizes. Available with nominal micron ratings of 0.5, 1, 5, 10, 20, and 50. Ideal for aggressive chemicals and general filtration requirements when depth filtration is required. Each cartridges is individually shrink wrapped.
Cartridges rated for temperatures up to 125 °F. Polypropylene construction for excellent chemical resistance. No binders, additives, or lubricants to leach into the water. 5 GPM max flow rate for 5 micron cartridge, 9-3/4″ × 2-1/2″ OD.
*The depth filtration chart and diagram above refers to the LF-PP gradient density cartridges only.