20″ x 2-1/2″ Sediment Melt-Blown Filter (1, 5, 10, 20, or 50 Micron)

$8.00

  • 1, 5, 10, 20 or 50 Micron Rating
  • Each Cartridge Has 3 Layers
  • Gradient Density Sediment Cartridge
  • Increased Dirt Holding Capacity
This is a 20″ x 2-1/2″ sediment melt-blown filter in 1, 5, 10, 20, or 50 micron to remove dirt, rust, and sediment. It can be paired with whole house filtration systems.
Industry-standard size 10″ × 2.5″ sediment cartridge

20″ x 2-1/2″ Sediment Melt-Blown Filter (1, 5, 10, 20, or 50 Micron) Features & Benefits:

  • Gradient density, multi-layered, melt-blown sediment filter cartridge.
  • Larger particles are trapped in the outer layers, and smaller particles penetrate deeper.
  • Greater dirt holding ability and longer life than non-layered cartridges.
  • Thermally bonded polypropylene microfibers for purity and chemical compatibility
  • Contains no binders, agents, solvents, antistatic materials, or wetting agents
  • Meets FDA requirements for food and beverage contact
  • No leachable or extractable to contaminate
  • No surface binders to reduce flow and increase change-out frequency
  • Cartridges are individually shrink-wrapped
  • Micron rating is molded into the cartridge
  • Available in a wide range of lengths and micron ratings

Applications:

  • Whole House Sediment Filtration
  • Reverse Osmosis Prefiltration
  • Food and beverages
  • Oil and gas
  • Fine chemicals
  • Electronics
  • Metal finishing
  • Pulp and paper

 

Flow Rate vs Pressure Loss for the 20" x 2-1/2" Sediment Melt-Blown Filter

1 Micron Cartridge Replaces:
  • Clack Corporation 31012000
  • Flow-Pro FPMB1-20
  • GE Hytrex GX01-20
  • GE Osmonics MB-01-20 (Part# 1013239)
  • GE Purtrex PX01-20
  • GE Selex SXE-20
  • Pentek P1-20 (Part# 155304-43)
  • Pentek PD-1-20
Gradient Density for the 20" x 2-1/2" Sediment Melt-Blown Filter
5 Micron Cartridge Replaces:
  • Clack Corporation 31052000
  • Flow-Pro FPMB5-20
  • GE Hytrex GX05-20
  • GE Osmonics MB-05-20 (Part# 1013240)
  • GE Purtrex PX05-20
  • GE Selex SXD-20
  • Pentek P5-20 (Part# 155016-43)
  • Pentek PD-5-20
Gradient Density Filters
10 Micron Cartridge Replaces:
  • Everpure EC210 (Part# EV953426)
  • GE Hytrex GX10-20
  • GE Osmonics MB-10-20 (Part# 1013242)
  • GE Purtrex PX10-20
  • GE Selex SXA-20
  • Pentek PD-10-20
Gradient Density for the 20" x 2-1/2" Sediment Melt-Blown Filter
20 Micron Cartridge Replaces:
  • GE Hytrex GX10-20
  • GE Osmonics MB-10-20 (Part# 1013242)
  • GE Purtrex PX10-20
  • GE Selex SXA-20
  • Pentek PD-10-20
Gradient Density Filters
50 Micron Cartridge Replaces:
  • Clack Corporation 31500988
  • Flow-Pro FPMB50-20
  • GE Hytrex GX50-20
  • GE Purtrex PX50-20
  • Pentek PD-50-20
Gradient Density Filters

Additional information

Weight 1 lbs
Cartridge Size

Micron Size

, , , ,

Material Composition

Cartridge Housing Size