Questions? Call Our team
of professionals for help @
Questions? Call Our team
of professionals for help @
Click for a larger image
| List Price: | |
| Price: | $919.00 |
FREE Shipping with orders over $99 (details) |
|
| You Save: | $230.00 (20%) |
|
In Stock
|
|
MicroZ high performance granular filter media that outperforms conventional multimedia due to its unique zeolite structure, 2.8x's the load capacity of sand. Micro-Z media is capable of handling higher service flow rate and increased load capacity. 5 - 10 micron nominal rating.
MicroZ Automatic Backwashing Sediment Filters are designed to remove ferric iron (rust), silt, and turbidity. This system is sized for a small house or cabin with 2 bathrooms.
| Controller Type: | Fleck 5800 | Amount of Media: | .75 Cubic Feet |
|---|---|---|---|
| Media Tank Type: | Structural PolyGlass | Service / Peak Flow: | 3 / 6 GPM |
| Media Tank Size: | 44" (H) × 8" (D) | Operating Pressure: | 20 - 125 PSI |
| Overall System Height: | 53.5" | Operating Temperature: | 36 - 120° F |
| Media Replacement: | Never | Shipping Weight: | 65 LBS |
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
