FREE Shipping with orders over $150 (details)
The WH1054CSCX acid neutralizing filter correct pH between 5 & 7. pH correction stops blue/green staining of sinks, toilets, tubs and showers and improves water taste by stopping corrosion of copper pipes.
A combination of Magnesium Oxide and Calcite is used to achieve a balanced reaction in differing flow conditions. Magnesium Oxide dissolve faster and is best for high flows. Calcite produces a much slower reaction and works best for low flow rates. The combination provides even pH correction for homes with varying flow rates.
The Fleck 5600SXT backwashing control valve provides sediment filtration between 10 - 20 microns. Sediment is trapped in the media bed and backwashed automatically.
The Structural 10" × 54" PolyGlass tank has a removable dome hole cap for ease in adding media to the tank. As the water passes through the media bed, the minerals dissolve in the water to neutralize the acid. As a result the media bed diminishes and must be replenished from time to time. The dole hole allows replenishment to be performed without disconnecting the plumbing.
|Controller Type:||Fleck 5600SXT||Amount of Media:||2 Cubic Feet|
|Media Tank Type:||Structural PolyGlass||Flow Rate:||10 GPM (30.8L/min)|
|Media Tank Size:||54" (H) × 10" (D)||Operating Pressure:||20 - 125 PSI|
|Overall System Height:||63.75"||Operating Temperature:||36 - 120° F|
|Media Replacement:||When pH becomes acidic||Shipping Weight:||130 LBS|
|Max Capacity:||pH Dependent||Connection Size:||3/4" FNPT (Female National Pipe Thread)|