Questions? Call Our team
of professionals for help @
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $299.00 |
FREE Shipping with orders over $99 (details) |
|
|
Out of Stock
|
|
Tubing connection has never been easier than with Quick-Connect fittings. View our simplified Quick-Connect diagrams to see how...
View Table of Removable Contaminants
Reverse osmosis systems remove the entire spectrum of drinking water contaminants...
Reverse osmosis drinking water systems include membrane separation, activated carbon absorption and conventional filtration to reduce the entire spectrum of contaminants that can be found in water. RO systems substantially remove heavy metals, such as barium, cadmium, chromium, lead and mercury; radium 226 / 228 selenium, cysts, chlorine, salts, turbidity and more!
Use our Bottled Water Cost Calculator to find out how much of an impact you have on the environment.
Learn why filtration is better for the environment than bottled water.
| Specification | Data |
|---|---|
| Membrane | 50 GPD |
| Maximum Pressure | 100 psi |
| Minimum Pressure | 40 psi |
| Maximum TDS | 2,000 PPM |
| Maximum Hardness | 15 GPG |
| Maximum Iron | 0.3 PPM |
| Maximum HS | 0.0 PPM |
| Tubing (Tank & Faucet) | 3/8" |
| Tubing (Other) | 1/4" |
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
