Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $41.00
|
FREE Shipping with orders over $150 (details) |
|
|
Stock Item
|
|
Click to zoom in on reverse osmosis membrane diagram
Pentair's Residential Membranes use an industry leading state-of-the-art TLC (Thin Layer Composite) membrane providing high quality water for a broad range of water chemistries. Each membrane is required to meet our factory's strict performance requirements prior to shipment.
Pentair Membranes are interchangeable with Filmtec, GE, CSM & other standard size membranes. Upgrade your reverse osmosis system today to a top performing Pentair membrane and enjoy saving money.
| Model Number | Part Number | Nominal Performance Flow* GPD (LPD) |
Rejection Rate |
|---|---|---|---|
| GRO-50EN | 4004424 | 50 (189) | 96% |
| GRO-75EN | 4004425 | 75 (284) | 96% |
| TLC-24 | 655006-00 | 24 (91) | 98% |
| TLC-36 | 655007-00 | 36 (136) | 98% |
| TLC-50 | 555694-00 | 50 (189) | 98% |
| TLC-75 | 555693-00 | 75 (284) | 98% |
| TLC-100 | 655045-00 | 100 (378) | 98% |
(*Nominal performances are based on a 500 ppm softened tap at 65 psig (4.48 bar), 77°F (25°C), 15% recovery after 24 hours. Individual element flux may vary +/- 15%.)
| Model Number | Dimensions: Inches (Centimeters) | ||||
|---|---|---|---|---|---|
| A | B | C | D | E | |
| TLC-24 | 1.79 (4.55) | 11.75 (29.85) | 10.00 (25.40) | 0.875 (2.22) | 0.678 (1.72) |
| TLC-36 | 1.79 (4.55) | 11.75 (29.85) | 10.00 (25.40) | 0.875 (2.22) | 0.678 (1.72) |
| TLC-50 | 1.79 (4.55) | 11.75 (29.85) | 10.00 (25.40) | 0.875 (2.22) | 0.678 (1.72) |
| TLC-75 | 1.79 (4.55) | 11.75 (29.85) | 10.00 (25.40) | 0.875 (2.22) | 0.678 (1.72) |
| TLC-100 | 1.83 (4.65) | 11.75 (29.85) | 10.35 (26.30 | 0.875 (2.22) | 0.678 (1.72) |
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
