Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $138.00
|
FREE Shipping with orders over $150 (details) |
|
|
Stock Item
|
|
Our Lamps & Quartz Sleeves are shipped with superior packaging shown here. When you order with us you can be assured that your parts with arrive in perfect working order.
All Sterilight UV systems include an ultraviolet lamp, which is surrounded by a quartz sleeve. The amount of UV light created by the UV lamp decreases over time, requiring that the UV lamp be replaced.
A consumer must consider that when buying a UV system you are buying "water confidence". In order to ensure that confidence, the correct replacement lamp is vital to the continued performance of that piece of equipment. That being said if you buy a specific model it is imperative that you replace the lamp with one that has been designed for that model, otherwise how do you even know that the UV system is disinfecting your water?
There are companies in the water industry that are selling "knockoff" lamps targeting residential UV systems that are sold world wide. These lamps are being offered at a very low price with the promise that they operate the same as the UV manufacturer's lamps. This promise is untrue. If a consumer were to install a "knockoff" lamp the "water confidence" that was being offered by the UV manufacturer no longer holds true and cannot be supported by the manufacturer and voids the warranty on Viqua systems. H2O provides only original UV Max and Sterilight Replacement Lamps.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
