Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
|
Stock Item
|
Tubing connection has never been easier than with Quick-Connect fittings. View our simplified Quick-Connect diagrams to see how...
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
View Table of Removable Contaminants
Reverse osmosis systems remove the entire spectrum of drinking water contaminants...
Reverse osmosis drinking water systems include membrane separation, activated carbon absorption and conventional filtration to reduce the entire spectrum of contaminants that can be found in water. RO systems substantially remove heavy metals, such as barium, cadmium, chromium, lead and mercury; radium 226 / 228 selenium, cysts, chlorine, salts, turbidity and more!
Use our Bottled Water Cost Calculator to find out how much of an impact you have on the environment.
Learn why filtration is better for the environment than bottled water.
The innovative Aqua Flo twist and lock design makes service simple. Twist off the old cartridge and twist on the new. No messy sump removal. This Aqua Flo system makes drinking water better and life easier.
Hydrotech's latest RO features quick-change cartridges, which can be customized for changing water conditions. These proprietary cartridges also simplify the regular replacement as required - typically on an annual basis. The QCRO delivers bottle water quality without the hassle or cost.
| Contaminant | Influent challenge concentration mg/L | Maximum permissible product water concentration mg/L | Minimum % Reduction | Average % Reduction |
|---|---|---|---|---|
| Arsenic | 0.30 ± 10% | 0.010 | 98.7 | 99.6 |
| Barium | 10.0 ± 10% | 2.0 | 97.7 | 98.8 |
| Cadmium | 0.03 ± 10% | 0.005 | 97.3 | 98.8 |
| Chromium (+6) | 0.3 ± 10% | 0.1 | 97.6 | 99.1 |
| Chromium (+3) | 0.3 ± 10% | 0.1 | 99.6 | 99.7 |
| Copper | 3.0 ± 10% | 1.3 | 98.3 | 99.0 |
| Fluoride | 8.0 ± 10% | 1.5 | 96.3 | 97.7 |
| Lead | 0.15 ± 10% | 0.010 | 99.3 | 99.3 |
| Radium (226/228) |
25 pCi/L ± 10% | 5 pCi/L | 80.0 | 80.0 |
| Selenium | 0.10 ± 10% | 0.05 | 97.8 | 98.1 |
| Turbidity | 11 ± 1 NTU | 0.5 NTU | 96.7 | 98.9 |
| TDS | 750 ± 20% | 187 | 84.5 | 85.1 |
This system has been tested according to WQA S-300 for reduction of the substances listed above. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 58 standard.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
