100 GPD High Recovery Reverse Osmosis Membrane, Osmotik

$52.00

  • 100 Gallons Per Day
  • 1:1 High Recovery
  • Removes a wide variety of Inorganic & Organic Compounds

This is a 100 GPD high recovery reverse osmosis membrane by Osmotik.
Requires a 300 mL flow restrictor on the drain line in order to achieve the 1:1 wastewater ratio
Average NaCl Rejection: 97-98%
Permeate Flow @ 65 PSI: 100 GPD

100 GPD High Recovery Reverse Osmosis Membrane, Osmotik

This Standard-Size Reverse Osmosis Membrane fits in a standard membrane housing, like the one on the RO unit shown here.

The same standard membrane housing can accommodate RO membranes with capacities ranging from 18 to 100 gallons per day (GPD).

Recommended Operating Parameters

Pressure 30 to 120 PSI Overall performance improves with pressure
pH 4.0 to 11.0 Rapid degradation occurs at high pH
Temperature 40 to 110°F Size element GPD for the lowest water temperature during the year
Minimum Concentrate Flow 5 times Permeate Flow Lower ratios increase the chance of fouling
Maximum Feed Flow Turbidity 5 NTU
Maximum Feed Silt Density 5 SDI Approximately 1/3 of the total chlorine in the feed permeates the membrane
Chlorine Tolerance 0 Total removal is recommended. The membrane has approximately 1,000 ppm-hr tolerance
Minimum TDS Rejection 94% 97 to 98% is typical for most city water

Additional information

Gallons Per Day

Country of Origin

Cleaning, Sanitizing & Replacement Manual

Download