10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) and 10" x 2-1/2" 5 Micron 4-Layer Sediment Melt-Blown Filter
10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) - Image 2
10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) - Image 3
10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) - Image 4
  1. 10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) and 10" x 2-1/2" 5 Micron 4-Layer Sediment Melt-Blown Filter
  2. 10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) - Image 2
  3. 10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) - Image 3
  4. 10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) - Image 4

10″ x 2-1/2″ Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron)

From: $4.00

  • 0.5, 1, 5, 10, 20 or 50 Micron Rating
  • Each Cartridge Has 3 Layers
  • Gradient Density Sediment Cartridge
  • Increased Dirt Holding Capacity
Cartridges Sold Individually
Case Quantity: 50
This is a 10″ x 2-1/2″ sediment melt-blown filter in 0.5, 1, 5, 10, 20, or 50 Micron to remove dirt, rust, and sediment.

10″ x 2-1/2″ Sediment Melt-Blown Filter Features & Benefits:

  • Industry-standard size 10″ × 2.5″ sediment cartridge
  • Gradient density, multi-layered
  • Larger particles are trapped in the outer layers, and smaller particles penetrate deeper.
  • Greater dirt holding ability and longer life than non-layered cartridges.
  • Thermally bonded polypropylene microfibers for purity and chemical compatibility
  • Contains no binders, agents, solvents, antistatic materials, or wetting agents
  • Meets FDA requirements for food and beverage contact
  • No leachable or extractable to contaminate
  • No surface binders to reduce flow and increase change-out frequency
  • Cartridges are individually shrink-wrapped
  • Micron rating is molded into the cartridge
  • Available in a wide range of lengths and micron ratings

Applications:

  • Whole house sediment filtration
  • Reverse osmosis prefiltration
  • Food and beverages
  • Oil and gas
  • Fine chemicals
  • Electronics
  • Metal finishing
  • Pulp and paper

 

10" x 2-1/2" Sediment Melt-Blown Filter (0.5, 1, 5, 10, 20, or 50 Micron) Flow Rate vs Pressure Loss