10" x 4-1/2" Sediment Melt-Blown Filter (1, 5, 20 or 50 Micron)
10" x 4-1/2" Sediment Melt-Blown Filter (1, 5, 20, or 50 Micron) - Image 2
10" x 4-1/2" Sediment Melt-Blown Filter (1, 5, 20, or 50 Micron) - Image 3
10" x 4-1/2" Sediment Melt-Blown Filter (1, 5, 20, or 50 Micron) - Image 4
  1. 10" x 4-1/2" Sediment Melt-Blown Filter (1, 5, 20 or 50 Micron)
  2. 10" x 4-1/2" Sediment Melt-Blown Filter (1, 5, 20, or 50 Micron) - Image 2
  3. 10" x 4-1/2" Sediment Melt-Blown Filter (1, 5, 20, or 50 Micron) - Image 3
  4. 10" x 4-1/2" Sediment Melt-Blown Filter (1, 5, 20, or 50 Micron) - Image 4

10″ x 4-1/2″ Sediment Melt-Blown Filter (1, 5, 20, or 50 Micron)

$14.00

  • 1, 5, 20 or 50 Micron Rating
  • Each Cartridge Has 3 Layers
  • Gradient Density Sediment Cartridge
  • Increased Dirt Holding Capacity
Cartridges Sold Individually
Case Quantity: 18

This is a 10″ x 4-1/2″ sediment melt-blown filter in 1, 5, 20, or 50 micron to remove dirt, rust, and sediment. It can be paired with a whole house filtration system.

BB/Full Flow Size 10″ × 4.5″ sediment cartridge

10″ x 4-1/2″ Sediment Melt-Blown Filter (1, 5, 20 or 50 Micron) Features & Benefits:

  • Gradient density, multi-layered, melt-blown sediment filter cartridge.
  • Larger particles are trapped in the outer layers, and smaller particles penetrate deeper.
  • Greater dirt holding ability and longer life than non-layered cartridges.
  • Thermally bonded polypropylene microfibers for purity and chemical compatibility
  • Contains no binders, agents, solvents, antistatic materials, or wetting agents
  • Meets FDA requirements for food and beverage contact
  • No leachable or extractable to contaminate
  • No surface binders to reduce flow and increase change-out frequency
  • Cartridges are individually shrink-wrapped
  • Micron rating is molded into the cartridge
  • Available in a wide range of lengths and micron ratings

Applications:

  • Whole House Sediment Filtration
  • Reverse Osmosis Prefiltration
  • Food and beverages
  • Oil and gas
  • Fine chemicals
  • Electronics
  • Metal finishing
  • Pulp and paper

 

Flow Rate vs Pressure Loss for the 10" x 4-1/2" Sediment Melt-Blown Filter

Grooved Cartridges have longer life and increased performance such as the 10" x 4-1/2" Sediment Melt-Blown FilterGrooved Cartridges have longer life and increased performance.