Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $15.00
|
FREE Shipping with orders over $150 (details) |
|
|
Stock Item
|
|
GAC Series cartridges effectively reduce unwanted tastes, odor and chlorine taste & odor from your drinking water.* They are designed to allow maximum contact between the water and carbon, ensuring maximum adsorption.
The construction of the cartridge allows water to enter at one end and pass through the entire length of the carbon bed before exiting the other end of the cartridge, while an internal expansion pad minimizes channeling or bypass. Before the water exits the cartridge, a 20-micron post filter helps reduce carbon fines and other suspended particles from the filtered water. The post-filter is permanently fastened to an innovative support basket ensuring that it is firmly secured and eliminating any potential for bypass.
GAC Series cartridges are available in a variety of sizes and flow rates, and effectively provide good general-purpose drinking water filtration.
| Model | Maximum Dimensions | Initial ΔP @ Flow* | Chlorine Capacity @ Flow* |
|---|---|---|---|
| GAC-10 | 9-1/4" × 2-7/8" | 7.0 psid @ 1.0 GPM | >5,000 gal @ 1.0 GPM |
| GAC-20 | 20" × 2-7/8" | 16.0 psid @ 2.0 GPM | >10,000 gal @ 2.0 GPM |
| GAC-BB | 9-1/4" × 4-1/2" | 6.0 psid @ 2.0 GPM | >12,500 gal @ 2.0 GPM |
| GAC-20BB | 20" × 4-1/2" | 5.0 psid @ 5.0 GPM | >25,000 gal @ 4.0 GPM |
* Based on manufacturer's internal testing.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
