Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $30.00
|
FREE Shipping with orders over $150 (details) |
|
|
Stock Item
|
|
We offer housing assemblies without cartridges so you can design your own system.
The CBR2-10 and CBR2-10R are advanced multimedia cartridges designed to reduce chlorine taste and odor, and other contaminants.
CBR2 Series cartridges are manufactured using a patented process, and combine powdered activated carbon (PAC) with a specially designed adsorbent medium for lead and mercury reduction.
These cartridges are protected by Endurawrap, a uniquely formulated polyolefin bilaminate prefilter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.
The CBR2-10R has a built-in flow restrictor (0.6 gpm) to allow for maximum contact time.
| VOC* Gallons @ GPM | 600 @ 0.6 (2270L @ 2.3 Lpm) |
|---|---|
| MTBE* Gallons @ GPM | 500 @ 0.6 (1890L @ 2.3 Lpm) |
| Cyst Reduction | >99.95% |
| Lead & Mercury Reduction | 2000 Gallons @ 0.6 GPM (7570 @ 3.8 Lpm) |
* Based on manufacturer's internal testing.
| Model | Maximum Dimensions | Nominal µm Rating* | Initial ΔP @ Flow* | Chlorine Capacity @ Flow* |
|---|---|---|---|---|
| CBR2-10 | 9-3/4" × 2-7/8" | 0.5 µm | 15.0 psid @ 1.0 GPM | >20,000 gal @ 1.0 GPM |
| CBR2-10R | 9-3/4" × 2-7/8" | 0.5 µm | Restricted to 0.6 GPM | >20,000 gal @ 0.6 GPM |
* Based on manufacturer's internal testing.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
