Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $319.00
|
FREE Shipping with orders over $150 (details) |
|
|
Stock Item
|
|
| Valve Specifications | |||
|---|---|---|---|
| Valve material: | Fiber Reinforced Polymer | Inlet/Outlet: | 3/4", 1", 1-1/4" NPTF |
| Cycles: | 5 | ||
| Flow Rates (50 psi Inlet) - Valve Alone | |||
|---|---|---|---|
| Continuous (15 psi drop): | 20 GPM | Peak (25 psi drop): | 26 GPM |
| CV (flow at 1 psi drop): | 5.0 | Max. backwash (25 psi drop): | 7 GPM |
| Regeneration | |||
|---|---|---|---|
| Downflow/Upflow: | Both | Adjustable cycles: | Yes |
| Time available: | Up to 199 minutes per cycle | ||
| Meter Information (not applicable to timer model) | |||
|---|---|---|---|
| Meter accuracy range: | .25 - 15 GPM ± 5% | Meter capacity range (gal.): | 1 - 60,000 |
| Dimensions | |||
|---|---|---|---|
| Distributor pilot: | 0.8125" or 1.05" pipe O.D. | Drain line: | 1/2" NPTF |
| Brine line: | 1600 - 3/8" | Mounting base: | 2-1/2" - 8 NPSM |
| Height from top of tank: | 7.5" | ||
| Typical Applications | |||
|---|---|---|---|
| Water softener: | 6"-12" diameter | Iron filter: | 6"-10" diameter |
| Sediment filter: | 6"-10" diameter | Carbon filter: | 6"-10" diameter |
| Neutralizing filter: | 6"-10" diameter | ||
| Additional Information | |||
|---|---|---|---|
| Injector brine system: | 1600 | Electrical rating: | 24 v, 50 Hz, 60 Hz |
| Max. VA: | 8.4 | Estimated shipping weight: | Time clock: 6 lbs. Metered valve: 7 lbs. |
| Pressure: | Hydrostatic: 300 psi Working: 20 - 125 psi |
Temperature: | 34 - 110 °F |
| Approvals | |||
|---|---|---|---|
| WQA Gold Seal system: | 0.5 - 2.0 cu. ft. | UL (powerhead only) | |
* Noryl is a registered trademark of General Electric Company.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
