Specifications:
- Filter media – Polyester-Plus
- Temperature – 140°F (standard cartridges) / 200°F (high temp. cartridges
- Flow rate- 35 GPM
- Media (sq ft) – 40
- Available in 0.35, 1, 5, 10, 20, 50, 100, or 150 micron
- Removes dirt, rust, & sediment
- Model 40 Jumbo
- 9.625″ × 7.75″ sediment cartridge
- Protects downstream filters and equipment
Harmsco Hurricane Model 40 Sediment Pleated Cartridge Filter 9.625″ x 7.75″, 35 GPM, 40 Sq. Ft. Media Features & Benefits:
- Fewer cartridges for fewer change-outs and lower maintenance cost
- Pleated Polyester-Plus filter media provides higher flow rates and lower initial pressure drop
- Pleated surface area provides higher loading capacity for longer filter life and increased particle removal
- End cap, center tube, and media are thermally bonded as one integral component for added strength
- Offered in three sizes (40, 90, and 170) and eight micron ratings (0.35, 1, 5, 10, 20, 50, 100, and 150) to meet all your high flow requirements
Harmsco Hurricane Model 40 Sediment Pleated Cartridge Filter Comparison
| Model | Micron | Media (sq ft) | Flow Rate (GPM) | Max Flow Rate (GPM) |
|---|---|---|---|---|
| HC-40-0.35 | 0.35 | 40 | 35 | 50 |
| HC-40-1 | 1 | 40 | 35 | 50 |
| HC-40-5 | 5 | 40 | 35 | 50 |
| HC-40-10 | 10 | 40 | 35 | 50 |
| HC-40-20 | 20 | 40 | 35 | 50 |
| HC-40-50 | 50 | 40 | 35 | 50 |
| HC-40-100 | 100 | 40 | 35 | 50 |
| HC-40-150 | 150 | 40 | 35 | 50 |
This high-surface-area sediment filter is designed for applications that require high flow, strong dirt-holding capacity, and longer run times between filter changes. Pleated cartridges are often chosen when standard depth filters load too quickly or when you want an efficient first-stage filter that helps protect downstream equipment and filtration stages.
This cartridge is commonly used in whole house and light-commercial setups where sediment, turbidity, or visible particulates are the main concerns.
What is the Harmsco Hurricane Model 40 Sediment Pleated Cartridge Filter Best For?
Primary use: Capturing sediment such as sand, silt, rust, and other visible particles
Common scenarios
- Well water applications with turbidity or particulate
- Pretreatment before carbon, UV, RO, or specialty filtration to reduce loading
- Systems where maintaining a higher flow is important
- Applications where a longer service interval is preferred
Why should I use a pleated water filter?
Pleated cartridges use folded media to increase surface area. More surface area typically supports:
- Higher flow with less pressure drop compared to many standard cartridges
- Longer run times before clogging in sediment-heavy water
- Efficient capture of particulate across the pleats
If your current filter clogs frequently, a pleated cartridge is often a practical upgrade.
How to choose the right micron rating
Micron rating determines how fine the filtration is.
General guidance
- Coarser micron ratings help with heavy sediment and usually last longer
- Finer micron ratings catch smaller particles but can load faster
If your water has heavy visible sediment, consider staged filtration or start with a coarser first stage to extend filter life.
When to replace
Replace when:
- Flow drops noticeably
- Pressure drop increases across the housing
- You see heavy discoloration or loading
- You reach your planned maintenance interval for your water conditions
If you are using this as pretreatment for UV, RO, or other equipment, consistent replacement helps protect downstream performance.
FAQs About Sediment Pleated Cartridge Filters
Q: What does the Harmsco Hurricane pleated cartridge remove?
A: It removes physical particles like sand, silt, rust, and turbidity that can cloud water and load equipment.
Q: Is a pleated cartridge better than a string-wound cartridge?
A: Pleated cartridges offer higher surface area and often maintain stronger flow longer. String-wound cartridges provide depth filtration. The best choice depends on sediment type, flow needs, and maintenance preference.
Q: Will this remove chlorine taste and odor?
A: No. Sediment cartridges target particles. Carbon filtration is used for chlorine taste and odor.
Q: Can I use this before a UV system?
A: Yes. Sediment filtration is commonly installed before UV to reduce turbidity and improve UV system performance.
Q: How do I know when it is time to replace it?
A: Replace when the flow drops, the pressure drop rises, or the cartridge is visibly loaded. Many systems also follow a schedule to prevent downtime.
Q: Will this reduce my water pressure?
A: It can if the cartridge becomes loaded with sediment. Pleated filters often maintain flow longer due to higher surface area, and replacing them on time helps maintain performance.
Q: Will this fit my housing?
A: Match the cartridge length and diameter to your housing specifications or your existing cartridge before ordering.
Choose a high-capacity pleated cartridge to capture sediment, protect downstream filtration, and maintain strong flow with longer run time between changeouts.
