The 244718 Pentek filter housing mounting bracket is a support bracket designed to securely mount a Pentek-style filter housing to a wall, board, or other stable surface. It reduces fitting strain and supports clean installs. A mounting bracket keeps the housing aligned, reduces strain on plumbing connections, and makes filter changes easier because the housing stays fixed in place during service.
This is a practical add-on for whole house prefilter housings, under-sink housings, and multi-stage filtration installations where stability and clean layout matter.
This Pentek Bracket is ONLY for Big Blue filter housings.
What is the 244718 Pentek Filter Housing Mounting Bracket Used For?
A mounting bracket is used to:
- Support the weight of a filter housing, especially when full of water
- Prevent twisting or movement during cartridge changes
- Reduce stress on inlet and outlet fittings
- Create a cleaner, more professional install, especially for multi-housing setups
When you typically need a bracket
You may want this bracket if:
- You are installing a new Pentek housing and want secure wall mounting
- Your current bracket is missing, cracked, or bent
- You are building a multi-stage filter wall and need consistent spacing
- You want easier cartridge changes without housing movement
Compatibility and Fit: 244718 Pentek Filter Housing Mounting Bracket
Before ordering, confirm:
- Your housing is a Pentek-style housing designed for bracket mounting
- The bracket mounting hole pattern matches your housing head or mounting points
- Your installation surface can support the housing weight and service forces
- You have enough clearance below the housing to remove the sump and cartridge
If you are mounting multiple housings, leave enough space between housings so each sump can be removed without interference.
Installation tips
- Mount to a solid structure such as wall studs, a plywood backer board, or properly rated masonry anchors.
- Use hardware rated for the expected load and wall material.
- Keep the housing level to support proper sealing and easier servicing.
- Plan shutoff valves and a bypass if possible to simplify future filter changes.
FAQs on Filter Housing Mounting Brackets
Q: What does a filter housing mounting bracket do?
A: It secures the filter housing to a stable surface so it stays aligned, reduces stress on fittings, and is easier to service.
Q: Will the 244718 Pentek filter housing mounting bracket fit my Pentek housing?
A: It fits housings designed for bracket mounting, but you should match the housing model and mounting hole pattern before ordering.
Q: Do I need a bracket for a whole house housing?
A: It is strongly recommended. Whole house housings can be heavy when full of water, and a bracket helps prevent movement and fitting strain.
Q: Can I mount a housing without a bracket?
A: Some people do, but it can increase stress on plumbing connections and make cartridge changes harder. A bracket is the more secure option.
Q: What hardware should I use to mount the bracket?
A: Use mounting hardware appropriate for your wall type and rated for the load. Stud mounting or a solid backer board is often preferred.
Q: How much clearance do I need under the housing?
A: Enough room to remove the sump and pull the cartridge straight down during service.
Q: Does this bracket affect water quality?
A: No. It improves stability and serviceability, not filtration performance.
Mount your Pentek housing securely with the 244718 bracket for a cleaner install, less strain on fittings, and easier cartridge changes.
