Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $548.00
|
FREE Shipping with orders over $150 (details) |
|
|
Stock Item
|
|
| Standard | Dosage |
|---|---|
| US Public Health Standard - EPA | 16mJ (high capacity stated) |
| Industry/Manufacturers Standard | 30mJ (primary capacity stated - top of page) |
| NSF Standard | 40mJ (lowest capacity stated) |
| Contaminant | Dosage required to sterilize (mJ/cm2) 99% Effectiveness |
|---|---|
| Cryptosporidium parvum oocysts | 8 |
| Giardia lamblia cysts (Beaver fever) | < 10 |
| Vibrio cholerae (Cholera) | 3 |
| Shigella dysenteriae (Dysentery) | 3 |
| E.coli (Escherichia coli O157:H7) | 6 |
| Salmonella typhi (Typhoid fever) | 9 |
| Shigella sonnei | 9 |
| Legionella pneumophila (Legionaires' disease) | 10 |
| Salmonella enteritidis (causes gastroenteritis) | 10 |
| Hepatitis A virus | 16 - 30 |
| Poliovirus Type 1 | 21 - 30 |
| Coxsackie B5 virus | 30 |
| Rotavirus SA11 | 31 - 36 |
It is strongly recommended (by all UV manufacturers) for maximum efficiency of your UV Sterilization, that you pre-filter your water with a 5 Micron sediment cartridge.
Do not connect plastic pipe or tubing directly to the UV system because the UV light will break down plastic over time. The best way to make the connection is with Dielectric Unions that allow for a connection from stainless steel to copper, that will not corrode.
Ultraviolet Sterilization Effectively Kills Bacteria, Viruses and Parasites such as Cryptosporidium & Giardia. Chlorination only keeps bacteria at low levels. The difference between Chlorination and UV is the difference between Sanitization and Sterilization. UV Sterilization provides complete protection for your family, employees and customers, from Microbes in your water.
It is estimated that seven to 30 million Americans develop a gastrointestinal illness each year, from drinking contaminated water. The Center for Disease Control and Prevention estimates 900 to 1,000 deaths occur from microbial illnesses from US drinking water. You can Protect Your Family, Company and Customers health, simply, easily and inexpensively by adding a UV Sterilization System to your home.
Need a replacement UV lamp? This system uses the
Sterilight S150RL Replacement Lamp
The quality of drinking water can change with time and become contaminated with harmful bacteria. VIQUA's Home and Tap families of ultraviolet (UV) disinfection systems offer a reliable, economical and chemical-free way to safeguard your drinking water. Our systems have been designed and tested to ensure quality drinking water is at everyone's finger tips. Regardless of your need, there is a VIQUA system to suit your requirements. Our Tap family — point of use systems that install under the sink, or "at the tap" — offers systems for water flows of 1 gpm to 4 gpm. Our Home family — point of entry systems that are plumbed in where your water enters your home - offers systems that range in flow rates from just 5 gpm for a small home or cottage, up to 18 gpm for a larger home or even a small business. Some of these systems even incorporate pre-filtration, saving you a step!
Short answer: everywhere! UV disinfection of drinking water has been growing steadily in popularity, as people search for a chemical-free option for ensuring their water is safe from microbiological contaminants.
High output lamp technology allows for a more compact footprint without compromising performance.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
