Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Standard | Dosage |
|---|---|
| US Public Health Standard - EPA | 16mJ (high capacity stated) |
| Industry/Manufacturers Standard | 30mJ (primary capacity stated - top of page) |
| NSF Standard | 40mJ (lowest capacity stated) |
| Contaminant | Dosage required to sterilize (mJ/cm2) 99% Effectiveness |
|---|---|
| Cryptosporidium parvum oocysts | 8 |
| Giardia lamblia cysts (Beaver fever) | < 10 |
| Vibrio cholerae (Cholera) | 3 |
| Shigella dysenteriae (Dysentery) | 3 |
| E.coli (Escherichia coli O157:H7) | 6 |
| Salmonella typhi (Typhoid fever) | 9 |
| Shigella sonnei | 9 |
| Legionella pneumophila (Legionaires' disease) | 10 |
| Salmonella enteritidis (causes gastroenteritis) | 10 |
| Hepatitis A virus | 16 - 30 |
| Poliovirus Type 1 | 21 - 30 |
| Coxsackie B5 virus | 30 |
| Rotavirus SA11 | 31 - 36 |
Sterilight Cobalt's compact, point-of-entry water treatment system with both disinfection and filtration. These systems feature high-output, axial flow UV technology, simple installation, and takes up the least amount of space compared to systems like it. The system has a 1" FNPT inlet connection and a unique combination port (3/4" FNPT & 1" MNPT) on the outlet connection. This compact unit incorporates Sterilight's Cobalt disinfection system and two, Big Blue size (4-1/2" Diameter) filter housings, all on the same installation bracket.
The Cobalt "BASIC" SC-320 disinfection systems incorporate high-output UV lamp technology coupled with efficient axial flow reactors. This modular line of UV disinfection systems in flow rates of 8-40 gpm (30.3-151.4 lpm), are ideally suited for commercial/industrial, point-of-entry applications with high flow rates and constant flow demands.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
