Questions? Call Our team
of professionals for help @
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $429.00 |
FREE Shipping with orders over $99 (details) |
|
|
In Stock
|
|
OASIS Point-Of-Use water coolers offer contemporary styling with proven cooling technology. The one-piece polyethylene blow-molded cabinets are designed to allow easy access to internal components. All are manufactured to exacting OASIS standards for quality and dependability. Cabinets are textured to help hide minor scratches and fingerprints.
| Cold Water Capacity Table | |||
|---|---|---|---|
| Room Temp | Water Temp | Gallons per hour of 50° Water | # of 3oz cups per hour |
| 70°F | 70°F | 1.4 | 59 |
| 80°F | 80°F | 1.0 | 42 |
| 90°F | 90°F | 0.6 | 25 |
| 100°F | 100°F | 0.4 | 17 |
Components in this water cooler are lead free as defined by the Safe Drinking Water Act Amendments of 1986 and the Lead Contamination Control Act of 1988. Model Listed by Underwriter's Laboratories to U.S. and Canadian Standards.
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
