Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $2,395.00
|
FREE Shipping with orders over $150 (details) |
|
|
Stock Item
|
|
Use our Bottled Water Cost Calculator to find out how much of an impact you have on the environment.
Learn why filtration is better for the environment than bottled water.
This system will improve water quality through your whole house by removing chlorine, chemical contaminants as well as dirt and sediments.
This great system will benefit everyone in your family, every day! Showering in chlorine free water will make a noticeable difference in your hair and skin.
| Maximum Capacity: | 525,000 gallons 1,987,341 liters |
Recommended Flow: | 16 -20 GPM 60.57 - 75.70 L/min. |
|---|---|---|---|
| Dimensions: | 74" (H) × 16" (D) 187.96 × 40.64 cm |
Unit Shipping Weight: | 165 lb 74.84 kg |
| Tank Size: | 65" (H) × 16" (D) 165.1 × 40.64 cm |
Amount of Carbon: | 108 lb/4 Cubic Feet 49.0 kg |
| Carbon Bed Life: | 3-4 Years Between Replacement | Type of Carbon: | Coconut Shell |
| Connection Size: | 1" FNPT (Female National Pipe Thread) |
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
