Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $1,345.00
|
FREE Shipping with orders over $150 (details) |
|
|
Stock Item
|
|
Use our Bottled Water Cost Calculator to find out how much of an impact you have on the environment.
Learn why filtration is better for the environment than bottled water.
This system will improve water quality through your whole house by removing chlorine, chemical contaminants as well as dirt and sediments.
This great system will benefit everyone in your family, every day! Showering in chlorine free water will make a noticeable difference in your hair and skin.
FW-58SXT-2.5-GAC has a service flow rate of up to 10 GPM and a peak flow rate of 12 GPM. It will provide great water flow in a home with 3-5 bathrooms. Sediment is filtered and rinsed clean away in the automatic backwash, making this system free of regular maintnance.
| Maximum Capacity: | 400,000 gallons | Recommended Flow: | 10 - 12 GPM |
|---|---|---|---|
| Dimensions: | 63.5" (H) × 14" (D) | Unit Shipping Weight: | 127 LBS |
| Tank Size: | 54" (H) × 13" (D) | Amount of Carbon: | 67.5 LBS / 2.5 Cubic Feet |
| Overall System Height: | 63.5" | Carbon Bed Life: | 3 - 5 Years Between Replacement |
| Connection Size: | 3/4" FNPT (Female National Pipe Thread) |
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
