Free Shipping
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
On All Orders $150 And Over!
See Our New Shipping Rates
Questions? Call Our team
of professionals for help @
Click for a larger image
| List Price: | |
| Price: | $795.00
|
FREE Shipping with orders over $150 (details) |
|
| You Save: | $200.00 (20%) |
|
Stock Item
|
|
Use our Bottled Water Cost Calculator to find out how much of an impact you have on the environment.
Learn why filtration is better for the environment than bottled water.
This system will improve water quality through your whole house by removing chlorine, chemical contaminants as well as dirt and sediments.
This great system will benefit everyone in your family, every day! Showering in chlorine free water will make a noticeable difference in your hair and skin.
This medium size carbon filter is recommended to provide whole house filtration of chlorine, taste & odor, chemical contaminants as well as dirt and sediments.
This system has a service flow rate of up to 5 GPM and a peak flow up to 7 GPM. It will not reduce water flow in a home with 2-3 bathrooms with standard showers. The sediment prefilter and sediment postfilter should be replaced every 6 months in most cases. The carbon bed inside the tank should be replaced every 2-3 years.
This great system will benefit every member of your family everyday you're at home. Showering in chlorine free water will make a noticeable difference in your hair and skin.
| Maximum Capacity: | 225,000 gallons | Recommended Flow: | 5 - 7 GPM |
|---|---|---|---|
| Dimensions: | 52" (H) × 20" (W) × 9" (D) | Unit Shipping Weight: | 75 lbs. |
| Tank Size: | 48" (H) × 9" (D) | Typical Sediment Filter Life: | 6 - 12 months |
| Carbon Bed Life: | 2 - 3 Years between replacement | Amount of Carbon | 45 lbs. / 1.5 cu. ft. |
| Connection Size: | 3/4" FNPT (Female National Pipe Thread) |
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
Download Quick-Connect Instructions
Requires Adobe Acrobat Reader
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
John Guest is the originator of Quick-Connect Fitting Technology and the world leader. John Guest Fittings, Valves & Tubing are produced in the UK to exacting quality standards that are second to none!
