Questions? Call Our team
of professionals for help @
Questions? Call Our team
of professionals for help @
Click for a larger image
| Price: | $399.00 |
FREE Shipping with orders over $99 (details) |
|
|
In Stock
|
|
| Valve Specifications | |||
|---|---|---|---|
| Valve material: | Fiber-reinforced polymer | Inlet/Outlet: | 3/4", 1" or 1-1/4" NPTF |
| Cycles: | 5 | ||
| Flow Rates (50 psi Inlet) - Valve Alone | |||
|---|---|---|---|
| Continuous (15 psi drop): | 19 GPM | Peak (25 psi drop): | 24 GPM |
| CV (flow at 1 psi drop): | 4.8 | Max. backwash (25 psi drop): | 17 GPM |
| Regeneration | |||
|---|---|---|---|
| Downflow/Upflow: | Downflow only | Adjustable cycles: | Yes |
| Time available: | Electromechanical: 164 minutes SE: 0 - 99 minutes ET: 0 - 999.9 minutes |
||
| Meter Information (not applicable to timer model) | |||
|---|---|---|---|
| Meter accuracy range: | .25 - 15 GPM ± 5% | Meter capacity range (gal.): | Standard: 125 - 2,125 Extended: 625 - 10,625 SE: 1 - 9,999 ET: 1 - 9,999,999 |
| Dimensions | |||
|---|---|---|---|
| Distributor pilot: | 1.05" O.D. | Drain line: | 1/2" O.D. |
| Brine line: | 1600 - 3/8", 1650 - 3/8 | Mounting base: | 2-1/2" - 8 NPSM |
| Height from top of tank: | 7-1/2" | ||
| Typical Applications | |||
|---|---|---|---|
| Water softener: | 6"-16" diameter (limited by maximum injector size) | Iron filter: | 6"-10" diameter |
| Sediment filter: | 8"-16" diameter (based on 10 GPM per sq. ft.) | Carbon filter: | 8"-16" diameter (based on 10 GPM per sq. ft.) |
| Neutralizing filter: | 8"-16" diameter (based on 10 GPM per sq. ft.) | ||
| Additional Information | |||
|---|---|---|---|
| Injector brine system: | 1600 | Electrical rating: | 24v, 110v, 220v - 50 Hz, 60 Hz |
| Max. VA: | 72 | Estimated shipping weight: | Time clock: 7 lbs. Metered valve: 10 lbs. |
| Pressure: | Hydrostatic: 300 psi Working: 20 - 125 psi |
Temperature: | 34° - 110° F |
| Approvals | |||
|---|---|---|---|
| WQA Gold Seal system: | 0.5 - 2.0 cu. ft. | UL registered component | |
* Noryl is a registered trademark of General Electric Company.
Fitting grips before it seals. Ensure tube is pushed into the tube stop.
Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak-proof seal.
Pull on the tube to check that it is secure. It is a good practice to test the system prior to leaving site and/or before use.
To disconnect, ensure the system is depressurized before removing the tube. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.