Sterilight® Silver "PLUS" 15 GPM Ultraviolet Water Sterilizer System

The Silver™ "PLUS" line of disinfection systems incorporates a UV intensity monitor in a modular line of ultraviolet disinfection systems that can be used in a myriad of applications where water quality is unknown and/or a monitoring system is required. Using Sterilume™-EX coated low pressure germicidal UV lamps, these systems provide an economical way of treating water requiring a 99.99% reduction in bacteria and viruses.

Features

• 15.1 gpm capacity (dose 30mJ/cm²)
• New Sterilume-EX UV lamps, these hard glass, 254 nm ultraviolet lamps feature advanced proprietary lamp technology allowing for consistent UV output over the life of the lamp coupled with uniform temperature distribution. The result is that Sterilume-EX lamps provide the required output over the entire 9000 hour lamp life
• Optional solenoid available
• Easy lamp replacement without having to disconnect the water supply
• Visual lamp-on indicators and audible lamp failure indicator
• Optional Y cable to provide connection to a remote monitoring system
• Drain port for reactor chamber flushing
• Seven year warranty on reactor chamber for unparalleled protection
• Polished 304 L stainless reactor chamber (316 L available)
• Maximum UV output with the highest quality quartz sleeve
• 3/4" FPT & 1" MPT connections for quick and easy installation
• 99.99% destruction of bacteria, virus and protozoan cysts (Giardia Lamblia and Cryptosporidium) at rated flow
• Nature's way to protect your water without the addition of harmful chemicals
• Open end quartz sleeve and aluminum gland nuts for optimum operating temperature and sealing efficiency

It is strongly recommended for maximum efficiency of your UV Sterilization that you pre-filter your water with a 5 µ sediment cartridge.

Do not connect plastic pipe or tubing directly to UV system because the UV light will break down plastic over time. The best way to make the connection is with Dielectric Unions that allow for a connection from stainless steel to copper that will not corrode. We have dielectric unions available in ½", ¾" & 1" sizes.