Print This Page Print   Email This Page to a Friend Email   Bookmark This Page Bookmark  Translate This Page Translate 

Sterilight® S80 Light Commercial 80 GPM
Ultraviolet Water Sterilizer System

Model # S80

Ultraviolet Water Purification > Sterilight Ultraviolet Sterilization Systems > Sterilight Light Commercial UV Systems
Need a replacement UV lamp? This system uses the
Sterilight S37RL-AM Replacement Lamp

The Sterilight® S80 Light Commercial System offers 80 GPM disinfection, with 2" MNPT inlet/outlet connections on a 316 L stainless steel reactor. System comes equipped with an LP HO amalgam based UV lamp with a 2 year life, and CoolTouch fan to reduce elevated water temperatures. The controller offers an intuitive interface with easy to read LED indicators. System delivers a 30 m/Jcm2 dose at end of lamp life.

Sterilight® UV Systems Warranty:

  • 7-Year Warranty on the Stainless Steel UV Reactor
  • 1-Year Warranty on UV lamps, quartz sleeves and sensor
  • 5-Year Pro-rated Warranty on all other components

Features

  • 316 Stainless Steel UV Reactor w 2" MNPT Connections
  • Low Pressure, High Output Amalgam Lamp - 2 Year Life
  • CoolTouch Fan
  • Audible Alarm
  • New Lamp Button
  • Lamp Age Indicator
  • Ballast Operation Indicator
  • Solenoid Operation indicator (Solenoid Optional)
  • Fan Operation Indicator
  • Sensor Reading Indicator

It is strongly recommended (by all UV manufacturers) for maximum efficiency of your UV Sterilization, that you pre-filter your water with a 5 Micron sediment cartridge.

Do not connect plastic pipe or tubing directly to the UV system because the UV light will break down plastic over time. The best way to make the connection is with Dielectric Unions that allow for a connection from stainless steel to copper, that will not corrode.
S80
 Model # S80
Click for larger image

[ PDF format, requires Adobe Acrobat to view  Download product sheet  ]

[ PDF format, requires Adobe Acrobat to view  Download service manual  ]

$3,695.00
Add to Cart
Quantity:  
Units Ordered Individually
 Case Quantity: 1 Unit
Made in Canada
Made in Canada


Standard Dosage
US Public Health Standard - EPA16mJ (high capacity stated)
Industry/Manufacturers Standard30mJ (primary capacity stated – top of page)
NSF Standard40mJ (lowest capacity stated)
Contaminant Dosage required to sterilize
(mJ/cm2) 99% Effectiveness
Cryptosporidium parvum oocysts8
Giardia lamblia cysts (Beaver fever)< 10
Vibrio cholerae (Cholera)3
Shigella dysenteriae (Dysentery)3
E.coli (Escherichia coli O157:H7)6
Salmonella typhi (Typhoid fever)9
Shigella sonnei9
Legionella pneumophila (Legionaires' disease)10
Salmonella enteritidis (causes gastroenteritis)10
Hepatitis A virus16 - 30
Poliovirus Type 121 - 30
Coxsackie B5 virus30
Rotavirus SA1131 - 36

 Specifications

Flow Rate at 30 mJ/cm²: 80 GPM
302.83 L/min
 Dimensions: 41"(L) × 4"(D)
104.14 cm × 11.43 cm
Shipping Weight: 14 lb.
6.35 kg
 Electrical: 120-240V AC, 50-60 Hz
230 W (total), 200 W (lamp)
Maximum Operating Pressure: 100 psi
6.89 bar
 Ambient Operating Air
Temperature Range:		 32 - 104 °F
0 - 40 °C
Quartz Sleeve: Yes Inlet/Outlet Port Size: 2" MNPT
Visual "Power On" and
Lamp Failure System:		 Yes Reactor Chamber Material: 316 Stainless Steel
Maximum Humidity: 100% Maximum Hardness: 120 PPM (7 Grains)
Maximum Iron: 0.3 PPM Minimum UV Transmittance: 85%



 Add-Ons / Accessories / Replacement Cartridges & Parts

Model # Description Price
S37RL-AM Made in the United States Sterilight® Replacement Lamp for S80, SM80 & SV50 - 2 Year Life
QS-37 Sterilight® Replacement Quartz Sleeve for S80, SM80 & SV50
$79.00
 Add to Cart