Fleck Control Valves
Model #5600 - Timer and Meter Control
|
Product Features
- Simple mechanical design is easy to understand
- Two valve body designs: one for downflow regeneration and one for upflow (covers every valve in the 5600 family - quick access to all internal components)
- Injector/drain modules containing the brine valve, flow controls and injector are removable from the valve's exterior
- Ruggedly built timer is designed with heavy-duty 3/8" wide plastic gears
- 5600 controls are user friendly and easy to program
- Non-corrosive, UV-resistant Noryl® valve body
- Choice of 7 or 12 day clock or demand regeneration with either mechanical or electronic meter
- Economical &emdash; small annual power consumption; keeps the time and activates the piston/valve mechanics with a single motor
- Designed with double backwash
Options
- Bypass valve (Noryl® or lead-free brass**)
- Backwash filter
- Upflow regeneration
- 35 day timer
- Low water use piston (uses as little as 29 gal./ regeneration)
- Meter initiated regeneration
- Auxiliary switches
Move your mouse over the following
links to swap out the photo:
Front | Back | Components
|
download 5600 specifications
(78 kb PDF)
download 5600 service manual
(624 kb PDF, rev. 4/2001)
| Valve material |
Noryl®* |
| Inlet/Outlet |
3/4", 1", 1-1/4" NPTF |
| Cycles |
7 |
| Continuous (15 psi drop) |
20 GPM |
| Peak (25 psi drop) |
26 GPM |
| CV (flow at 1 psi drop) |
5.0 |
| Max. backwash (25 psi drop) |
7 GPM |
| Downflow/Upflow |
Both |
| Adjustable cycles |
Brine flow only |
| Time available |
180 minutes |
| Meter accuracy range |
0.25 - 15 GPM ± 5% |
| Meter capacity range (gal.) |
Standard: 125 - 2,125
Extended: 625 - 10,625 |
| (Not Applicable to Timer Model) |
| Distributor pilot |
0.8125" or 1.050" pipe O.D. |
| Drain line |
1/2" NPTF |
| Brine line |
1600 - 3/8" |
| Mounting base |
2-1/2" - 8 NPSM |
| Height from top of tank |
7" |
| Water softener |
6"-12" diameter |
| Iron filter |
6"-10" diameter |
| Sediment filter |
6"-10" diameter |
| Carbon filter |
6"-10" diameter |
| Neutralizing filter |
6"-10" diameter |
| Injector brine system |
1600 |
| Electrical rating |
24v, 110v, 220v - 50 Hz, 60 Hz |
| Max. VA |
3 |
| Estimated shipping weight |
Time clock: 5 lbs.
Metered valve: 6 lbs. |
| Pressure |
Hydrostatic: 300 psi
Working: 20 - 120 psi |
| Temperature |
34° - 110° F |
| WQA Gold Seal system |
0.5 - 2.0 cu. ft. |
| UL registered component |
|
|
