Fleck Control Valves - Model #2510 (Timer Control)

Product Features

Fully adjustable 5-cycle top mount control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, brine refill and downflow service
Time-tested hydraulically balanced piston, seal and spacer concept to control service flow and regeneration
Non-corrosive, high-tech material construction
Excellent flow rates - 19 GPM continuous, 24 GPM peak
Backwash capacity handles tanks up to 16" diameter for softener applications, 16" diameter for filter applications
Choice of 7 or 12 day clock, manual or meter initiated regeneration, mechanical or electronic control

Options

Model #: Fleck 2510

Download Specifications (PDF)

Valve Specifications

Valve material:	Fiber-reinforced polymer	Inlet/Outlet:	¾", 1" or 1¼" NPTF
Cycles:	5

Flow Rates (50 psi Inlet) - Valve Alone

Continuous (15 psi drop):	19 GPM	Peak (25 psi drop):	24 GPM
CV (flow at 1 psi drop):	4.8	Max. backwash (25 psi drop):	17 GPM

Regeneration

Downflow/Upflow:	Downflow only	Adjustable cycles:	Yes
Time available:	Electromechanical: 164 minutes SE: 0 - 99 minutes ET: 0 - 999.9 minutes

Meter Information (not applicable to timer model)

Meter accuracy range:

.25 - 15 GPM ± 5%

Meter capacity range (gal.):

Standard: 125 - 2,125
Extended: 625 - 10,625
SE: 1 - 9,999
ET: 1 - 9,999,999

Dimensions

Typical Applications

Water softener:	6"-16" diameter (limited by maximum injector size)	Iron filter:	6"-10" diameter
Sediment filter:	8"-16" diameter (based on 10 GPM per sq. ft.)	Carbon filter:	8"-16" diameter (based on 10 GPM per sq. ft.)
Neutralizing filter:	8"-16" diameter (based on 10 GPM per sq. ft.)

Additional Information

Injector brine system:	1600	Electrical rating:	24v, 110v, 220v - 50 Hz, 60 Hz
Max. VA:	72	Estimated shipping weight:	Time clock: 7 lbs. Metered valve: 10 lbs.
Pressure:	Hydrostatic: 300 psi Working: 20 - 125 psi	Temperature:	34° - 110° F